How to Install MODX Revolution on a Fedora 26 LAMP VPS
MODX Revolution is a fast, flexible, scalable, free and open source, enterprise-grade Content Management System (CMS) written in PHP. It is particularly well-suited to building high-end sites since it features advanced multi-lingual capabilites, and is built from the ground up using secure design principles.
In this tutorial we are going to install MODX Revolution 2.6.0 CMS on a Fedora 26 LAMP VPS using Apache, PHP 7.1, and a MariaDB database.
- A clean Vultr Fedora 26 server instance with SSH access.
Step 1: Add a Sudo User
We will start by adding a new
First, log into your server as
Add a new user called
user1 (or your preferred username).
Next, set the password for the
When prompted, enter a secure password.
Now check the
/etc/sudoers file to make sure that the
sudoers group is enabled.
Look for a section like this.
%wheel ALL=(ALL) ALL
Make sure it is uncommented. This line tells us that users who are members of the
wheel group can use the
sudo command to gain
Once you have edited the file, you can save and exit by pressing "
Esc" and then entering "
:wq" to "write" and "quit" the file.
Next we need to add
user1 to the
usermod -aG wheel user1
We can verify the
user1 group membership and check that the
usermod command worked with the
Now use the
su command to switch to the new sudo user
su - user1
The command prompt will update to indicate that you are now logged into the
user1 account. You can verify this with the
Now restart the
sshd service so that you can login via
ssh with the new non-root sudo user account you have just created.
sudo systemctl restart sshd
root account (which will disconnect your
You can now
ssh into the server instance from your local host using the new non-root sudo user
If you want to execute sudo without having to type a password every time, then open the
/etc/sudoers file again, using
Edit the section for the
wheel group so that it looks like this.
%wheel ALL=(ALL) NOPASSWD: ALL
Please note: Disabling the password requirement for the sudo user is not a recommended practice, but it is included here as it can make server configuration much more convenient and less frustrating, especially during longer systems administration sessions. If you are concerned about the security implications, you can always revert the configuration change to the original after you finish your administration tasks.
Whenever you want to log into the
root user account from within the
sudo user account, you can use one of the following commands.
sudo -i sudo su -
You can exit the
root account and return back to your
sudo user account any time.
Step 2: Update Fedora 26 System
Before installing any packages on the Fedora server instance, we will first update the system.
Make sure you are logged in to the server using a non-root sudo user and run the following command.
sudo dnf -y update
Step 3: Install Apache
Install the Apache web server.
sudo dnf -y install httpd
Then use the
systemctl command to start and enable Apache to execute automatically at boot time.
sudo systemctl enable httpd sudo systemctl start httpd
Check your Apache configuration file to ensure that the
DocumentRoot directive points to the correct directory.
sudo vi /etc/httpd/conf/httpd.conf
DocumentRoot configuration option should look like this.
Now, let's make sure that the
mod_rewrite Apache module is loaded. We can do this by searching the Apache base modules configuration file for the term "
Open the file.
sudo vi /etc/httpd/conf.modules.d/00-base.conf
Search for the term
mod_rewrite Apache module is loaded, you should find a configuration line looking like this.
LoadModule rewrite_module modules/mod_rewrite.so
If the above line starts with a semi-colon, you will need to remove the semi-colon to uncomment the line and load the module. This, of course, applies to any other required Apache modules too.
We will restart Apache at the end of this tutorial, but restarting Apache regularly during installation and configuration is certainly a good habit, so let's do it now.
sudo systemctl restart httpd
Step 4: Open Web Firewall Ports
We now need to open the default
HTTPS ports as they will be blocked by
firewalld by default.
Open the firewall ports.
sudo firewall-cmd --permanent --add-port=80/tcp sudo firewall-cmd --permanent --add-port=443/tcp
Reload the firewall to apply the changes.
sudo firewall-cmd --reload
You will see the word
success displayed in your terminal after each successful firewall configuration command.
We can quickly verify that the Apache
HTTP port is open by visiting the IP address or domain of the server instance in a browser.
If everything is set up correctly, you should see the default Apache web page in your browser.
Step 5: Disable SELinux
SELinux stands for "Security Enhanced Linux". It is a security enhancement to Linux which allows users and administrators more control over access control. It is enabled by default in Fedora 26, but it is definitely not essential for server security as many Linux server distributions do not ship with it installed or enabled by default.
To avoid file permission problems with MODX Revolution later down the line, we are going to disable SELinux, for now. So open the SELinux configuration file with your favourite terminal editor.
sudo vi /etc/selinux/config
SELINUX=disabled, then save the file.
To apply the configuration change, SELinux requires a server reboot, so you can either restart the server using the Vultr control panel or you can simply use the
shutdown command to cleanly shutdown and restart the server.
sudo shutdown -r now
When the server reboots, your SSH session will get disconnected and you may see a message complaining about a
'broken pipe' or informing you
'Connection closed by remote host'. This is nothing to worry about, simply wait for 20 seconds or so and then SSH back in again with your own username and domain,
Or with your own username and IP address.
Once you have logged back in, you should check the status of SELinux with the
sestatus command to make sure it is properly disabled.
You should see a message saying
SELinux status: disabled. If you see a message saying
SELinux status: enabled (or something similar) you will need to repeat the above steps and ensure that you properly restart your server.
Step 6: Install PHP 7.1
We can now install PHP 7.1 along with the necessary PHP modules required by MODX Revolution CMS.
sudo dnf -y install php php-mysqlnd php-mbstring php-gd php-common php-pdo php-pecl-imagick php-xml
Step 7: Install MariaDB
Fedora 26 defaults to using MariaDB, which is an enhanced, fully open source, community developed, drop-in replacement for MySQL.
sudo dnf -y install mariadb-server
Start and enable MariaDB to execute automatically at boot time.
sudo systemctl enable mariadb sudo systemctl start mariadb
Secure your MariaDB installation.
root password will probably be blank, so simply hit "
enter" when prompted for the
When prompted to create a MariaDB/MySQL
root user, select "
Y" (for yes) and then enter a secure
root password. Simply answer "
Y" to all of the other yes/no questions as the default suggestions are the most secure options.
Step 8: Create Database for MODX Revolution
Log into the MariaDB shell as the MariaDB
root user by running the following command.
sudo mysql -u root -p
To access the MariaDB command prompt, simply enter the MariaDB
root password when prompted.
Run the following queries to create a MariaDB database and database user for MODX Revolution.
CREATE DATABASE modx_data CHARACTER SET utf8 COLLATE utf8_general_ci; CREATE USER 'modx_user'@'localhost' IDENTIFIED BY 'UltraSecurePassword'; GRANT ALL PRIVILEGES ON modx_data.* TO 'modx_user'@'localhost'; FLUSH PRIVILEGES; EXIT;
You can replace the database name
modx_data and username
modx_user with something more to your liking, if you prefer. Also, make sure that you replace "
UltraSecurePassword" with an actually secure password.
Step 9: Install MODX Revolution Files
Change your current working directory to the default web directory.
If you get an error message saying something like
'No such file or directory' then try the following command.
cd /var/www/ ; sudo mkdir html ; cd html
Your current working directory should now be
/var/www/html/. You can check this with the
pwd (print working directory) command.
wget to download the MODX Revolution installation zip package.
sudo wget https://modx.com/download/direct?id=modx-2.6.0-pl.zip
Please note: You should check for the most recent version by visiting the MODX Revolution download page.
List the current directory to check that you have successfully downloaded the file.
Let's give the package a simpler name.
sudo mv direct\?id\=modx-2.6.0-pl.zip modx.zip
Now uncompress the zip package.
sudo unzip modx.zip
Move all of the installation files to the web root directory.
sudo mv modx-2.6.0-pl/* /var/www/html
Change ownership of the web files to avoid any permissions problems.
sudo chown -R apache:apache *
Restart Apache again.
sudo systemctl restart httpd
Now we're ready to move on to the final step.
Step 10: Complete MODX Revolution Installation
It's time to visit the IP address of your Fedora 26 server instance in your browser. Or, if you've already configured your Vultr DNS settings (and given it enough time to propagate) you can simply visit your domain instead.
To access the MODX revolution installation page, enter your Vultr instance IP address, followed by
/setup into your browser address bar.
Most of the installation options are self explanatory, but here are a few pointers to help you along:
Select your language.
Click the "
Next" button to continue the installation.
New Installation" and leave the folder permissions at their default values. Click "
Next" when you are ready to move on to the next step.
Set the following database options.
Database type: mysql Database host: localhost Database login name: modx_user (or your previously selected name) Database password: UltraSecurePassword (or your previously chosen password) Database name: modx_data (or your previously selected name) Table prefix: modx_
Once you have entered the above database options, click on the link below to "
Test database server connection and view collations". You should see a message that says:
Connecting to database server: Success!. If you get any errors, go back and ensure that all database options are correct.
You can leave the character set and collation options at their default values. They should look like this.
Connection character set: utf8 Collation: utf8_general_ci
When you are satisfied with your selected installation options, you can click on the link below to "
Create or test selection of your database".
You will be prompted to enter your admin details, which will be used to login to the CMS. Fill them in as shown below and click "
Administrator name: <your_prefered_admin_name> Administrator email: <your_admin_email> Administrator password: <a_secure_password Confirm password: <the_same_secure_password>
You should see an Installation Summary. As long as everything looks okay, you can simply click "
Install" to Install MODX Revolution to your server instance.
If the installation was successful, you should see a confirmation page that says
Core installation was successful. Simply click "
Next" to continue.
You can now login to your MODX Revolution admin panel using the login details you entered earlier during installation.
Please note: During installation and login, you may see some warning messages about directories and files. Simply follow the instructions shown on the warning pages and the warning messages will disappear.
If you haven't already set up your Vultr DNS, then that should probably be your next step.
Now you can start adding your content and start configuring the look of your site. Be sure to check out the excellent MODX Revolution docs for more guidance on how to build and configure your site.