How to Install ImpressPages CMS 5.0 on a Fedora 26 LAMP VPS

Published on: Fri, May 4, 2018 at 11:10 am EST
CMS Fedora Linux Guides Server Apps

ImpressPages CMS 5.0 is a simple and effective, free and open source, user-friendly, MVC-based, Content Management System (CMS). ImpressPages CMS 5.0 features: inline editing with a drag and drop interface, lightweight and clean MVC routing, template helpers, URL generation, and is multi-lingual by default.

In this tutorial we are going to install ImpressPages CMS 5.0 on a Fedora 26 LAMP VPS using Apache web server, PHP 7.1, and a MariaDB database.

Prerequisites

  • A clean Vultr Fedora 26 server instance with SSH access

Step 1: Add a Sudo User

We will start by adding a new sudo user.

First, log into your server as root:

ssh root@YOUR_VULTR_IP_ADDRESS

Add a new user called user1 (or your preferred username):

useradd user1

Next, set the password for the user1 user:

passwd user1

When prompted, enter a secure and memorable password.

Now check the /etc/sudoers file to make sure that the sudoers group is enabled:

visudo

Look for a section like this:

%wheel        ALL=(ALL)       ALL

... and make sure it is uncommented. This line tells us that users who are members of the wheel group can use the sudo command to gain root privileges.

Once you have edited the file, you can save and exit by pressing Esc and then entering :wq to "write" and "quit" the file.

Next we need to add user1 to the wheel group:

usermod -aG wheel user1

We can verify the user1 group membership and check that the usermod command worked with the groups command:

groups user1

Now use the su command to switch to the new sudo user user1 account:

su - user1

The command prompt will update to indicate that you are now logged into the user1 account. You can verify this with the whoami command:

whoami

Now restart the sshd service so that you can login via ssh with the new non-root sudo user account you have just created:

sudo systemctl restart sshd

Exit the user1 account:

exit

Exit the root account (which will disconnect your ssh session).

exit

You can now ssh into the server instance from your local host using the new non-root sudo user user1 account:

ssh user1@YOUR_VULTR_IP_ADDRESS

If you want to execute sudo without having to type a password every time, then open the /etc/sudoers file again, using visudo:

sudo visudo

Edit the section for the wheel group so that it looks like this:

%wheel        ALL=(ALL)       NOPASSWD: ALL

Please note: Disabling the password requirement for the sudo user is not a recommended practice, but it is included here as it can make server configuration much more convenient. If you are concerned about the security implications, you can always revert the configuration change to the original after you finish your administration tasks.

Whenever you want to log into the root user account from within the sudo user account, you can use one of the following commands:

sudo -i
sudo su -

You can exit the root account and return back to your sudo user account any time by simply typing:

exit

Step 2: Update Fedora 26 System

Before installing any packages on the Fedora server instance, we will first update the system.

Make sure you are logged in to the server using a non-root sudo user and run the following command:

sudo dnf -y update

Step 3: Install Apache Web Server

Install the Apache web server with:

sudo dnf -y install httpd

Then use the systemctl command to start and enable Apache to execute automatically at boot time.

sudo systemctl enable httpd
sudo systemctl start httpd

Check your Apache configuration file to ensure that the DocumentRoot directive points to the correct directory.

sudo vi /etc/httpd/conf/httpd.conf

The DocumentRoot configuration option should look like this:

DocumentRoot "/var/www/html"

Now, let's make sure that the mod_rewrite Apache module is loaded. We can do this by searching the Apache base modules configuration file for the term "mod_rewrite". Open the file:

sudo vi /etc/httpd/conf.modules.d/00-base.conf

Search for the term mod_rewrite.

If the mod_rewrite Apache module is loaded, you should find a configuration line looking like this:

LoadModule rewrite_module modules/mod_rewrite.so

If the above line starts with a semi-colon, you will need to remove the semi-colon to uncomment the line and load the module. This, of course, applies to any other required Apache modules too.

We now need to edit Apache's default configuration file so that mod_rewrite will work correctly with ImpressPages CMS. Open the file:

sudo vi /etc/httpd/conf/httpd.conf

Then find the section that starts with <Directory "/var/www/html"> and change AllowOverride none to AllowOverride All. The end result (with all comments removed) should look something like this:

<Directory "/var/www/html">
    Options Indexes FollowSymLinks
    AllowOverride All
    Require all granted
</Directory>

Now save and close the Apache configuration file.

We will restart Apache at the end of this tutorial, but restarting Apache regularly during installation and configuration is certainly a good habit, so let's do it now.

sudo systemctl restart httpd

Step 4: Open Web Firewall Ports

We now need to open the default HTTP and HTTPS ports as they will be blocked by firewalld by default.

Open the firewall ports:

sudo firewall-cmd --permanent --add-port=80/tcp
sudo firewall-cmd --permanent --add-port=443/tcp

Reload the firewall to apply the changes.

sudo firewall-cmd --reload

You will see the word success displayed in your terminal after each successful firewall configuration command.

We can quickly verify that the Apache HTTP port is open by visiting the IP address or domain of the server instance in a browser:

http://YOUR_VULTR_IP_ADDRESS/

If everything has been set up correctly, you will see the default Apache web page in your browser.

Step 5: Disable SELinux

SELinux stands for "Security Enhanced Linux". It is a security enhancement to Linux which allows users and administrators finer access control. It is enabled by default in Fedora 26, but it is definitely not essential for server security as many Linux server distributions do not ship with it installed or enabled by default.

To avoid file permission problems with ImpressPages CMS later down the line, we are going to disable SELinux. Open the SELinux configuration file with your favorite terminal editor:

sudo vi /etc/selinux/config

Change SELINUX=enforcing to SELINUX=disabled and then save the file.

To apply the configuration change, SELinux requires a server reboot, so you can either restart the server using the Vultr control panel or you can simply use the shutdown command to cleanly shutdown and restart the server:

sudo shutdown -r now

When the server reboots, your SSH session will be disconnected and you may see a message informing you about a 'broken pipe' or 'Connection closed by remote host'. This is nothing to worry about, simply wait for 20 seconds or so and then SSH back in again (with your own username and domain):

ssh user1@YOUR_DOMAIN

Or (with your own username and IP address):

ssh user1@YOUR_VULTR_IP_ADDRESS

Once you have logged back in, you should check the status of SELinux again with the sestatus command to make sure it is properly disabled:

sudo sestatus

You should see a message saying SELinux status: disabled. If you see a message saying SELinux status: enabled (or something similar) you will need to repeat the above steps and ensure that you properly restart your server.

Step 6: Install PHP 7.1

We can now install PHP 7.1 along with all of the necessary PHP modules required by ImpressPages CMS.

sudo dnf -y install php php-mysqlnd php-mbstring php-gd php-common php-pdo php-xml

Step 7: Install MariaDB (MySQL) Server

Fedora 26 defaults to using MariaDB database server, which is an enhanced, fully open source, community developed, drop-in replacement for MySQL server.

Install MariaDB database server:

sudo dnf -y install mariadb-server

Start and enable MariaDB server to execute automatically at boot time.

sudo systemctl enable mariadb
sudo systemctl start mariadb    

Secure your MariaDB server installation:

sudo mysql_secure_installation

The root password will be blank, so simply hit enter when prompted for the root password.

When prompted to create a MariaDB/MySQL root user, select "Y" (for yes) and then enter a secure root password. Simply answer "Y" to all of the other yes/no questions as the default suggestions are the most secure options.

Step 8: Create Database for ImpressPages CMS

Log into the MariaDB shell as the MariaDB root user by running the following command.

sudo mysql -u root -p

To access the MariaDB command prompt, simply enter the MariaDB root password when prompted.

Run the following queries to create a MariaDB database and database user for ImpressPages CMS.

CREATE DATABASE impress_db CHARACTER SET utf8 COLLATE utf8_general_ci;
CREATE USER 'impress_user'@'localhost' IDENTIFIED BY 'UltraSecurePassword';
GRANT ALL PRIVILEGES ON impress_db.* TO 'impress_user'@'localhost';
FLUSH PRIVILEGES;
EXIT;

You can replace the database name impress_db and username impress_user with something more to your liking, if you prefer. Also, make sure that you replace "UltraSecurePassword" with an actual secure password.

Step 9: Install ImpressPages CMS Files

Change your current working directory to the default web directory.

cd /var/www/html/

If you get an error message saying something like 'No such file or directory', then try the following command:

cd /var/www/ ; sudo mkdir html ; cd html

Your current working directory should now be: /var/www/html/. You can check this with the pwd (print working directory) command:

pwd

Now use wget to download the ImpressPages CMS installation package.

sudo wget http://download.impresspages.org/ImpressPages_5_0_3.zip

Please note: The above ImpressPages CMS package URL was correct at the time of writing, but you should definitely check for the most recent version by visiting the ImpressPages CMS download page.

List the current directory to check that you have successfully downloaded the file.

ls -la

Remove index.html:

sudo rm index.html

Let's quickly install unzip so we can unzip the file.

sudo dnf -y install unzip

Now uncompress the zip archive.

sudo unzip ImpressPages_5_0_3.zip

Move all of the installation files to the web root directory:

sudo mv ImpressPages/* ImpressPages/.htaccess /var/www/html

Change ownership of the web files to avoid any permissions problems.

sudo chown -R apache:apache * .htaccess

Let's restart Apache again.

sudo systemctl restart httpd

Now we're ready to move on to the final step.

Step 10: Complete ImpressPages CMS Installation

It's now time to visit the IP address of your server instance in your browser, or if you've already configured your Vultr DNS settings (and given it enough time to propagate) you can simply visit your domain instead.

To access the ImpressPages CMS installation page, enter your Vultr instance IP address into your browser address bar, followed by index.php:

http://YOUR_VULTR_IP_ADDRESS/index.php

Most of the installation options are self explanatory, but here are a few pointers to help you along:

  1. Enter the following values on the Website Configuration page:

    Website name:               <name of your web site>
    Website e-mail address:     <admin email address>
    Time zone:                  <your time zone>
    

    And click Next.

  2. Enter the following values on the Database Configuration page:

    Database Host:              localhost 
    User name:                  impress_user
    User password:              UltraSecurePassword
    Database name:              impress_db
    

    And click Next.

  3. You will be redirected and logged into the Admin section of ImpressPages CMS and a message will appear displaying your admin login details, including an automatically generated password, so make sure you save your login details.

If you aren't redirected to the admin section automatically, you can visit the following URL to access the admin section manually:

http://YOUR_VULTR_IP_ADDRESS/admin

If you still can't access the admin section, try editing some of the values in the .htaccess file in the webroot directory:

sudo vi .htaccess

Uncommenting the following .htaccess options should help:

Options -Indexes
Options -MultiViews

... and while you're there, it won't hurt to uncomment these lines too:

php_value upload_max_filesize 1000M
php_value post_max_size 1000M
php_value memory_limit 100M

Don't forget to restart Apache after the configuration changes!

sudo systemctl restart httpd

You are now ready to start adding your content and configuring the look and feel of your site. Make sure you check out the excellent ImpressPages CMS documentation for more information about how to build and configure your site.

I hope you've enjoyed this tutorial, and best of luck developing your new ImpressPages CMS based web site!

Want to contribute ?

You could earn up to $300 by adding new articles